# Council Decision of 13 November 2012 on the signing and conclusion of the Agreement between the Government of the United States of America and the European Union on the coordination of energy-efficiency labelling programmes for office equipment (Text with EEA relevance) (2013/107/EU), Division: How to Use this Section


EPA and the European Commission utilise, where possible, widely-accepted industry practices for measuring product performance and power consumption under typical operating conditions. The test methods in this specification are based on standards from the Video Electronics Standards Association (VESA) Display Metrology Committee and the International Electrotechnical Commission (IEC). In cases where the VESA and IEC standards were insufficient for the needs of the ENERGY STAR program, additional testing and measurement methods were developed in cooperation with industry stakeholders.
To ensure a consistent means for measuring the power consumption of electronics products such that the test results may be reproduced, and that outside factors do not adversely affect the test results, the following protocol must be followed. It has four main components:
Test Conditions and Instrumentation
Setup
Test Method
Documentation
Partners may elect to use an in-house or independent laboratory to provide the test results.

---
Source: https://www.legislation.gov.uk/eudn/2013/107/schedule/ANNEX C/division/II./division/4./division (the official version)
Page: https://openlegislation.uk/eu-decision-2013-107/schedule-ANNEX C/division-II./division-4./division
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.